AREAS WE SERVICE
Ajax
Aurora
Barrie
Bellville
Bolton
Bowmanville
Bradford
Brampton
Brooklin
Burlington
Caledon
Cambridge
Cobourg
Courtice
East Gwillimbury
East York
Etobicoke
Georgetown
Georgina
Guelph
Hamilton
Innisfill
Keswick
Kitchener
Lindsay
Markham
Millbrook
Milton
Mississauga
Newcastle
Newmarket
North York
Oakville
Orangeville
Orono
Oshawa
Peterborough
Pickering
Port Perry
Port Hope
Richmond Hill
Scarborough
Stouffville
Thornhill
Toronto
Uxbridge
Vaughan
Waterloo
West Gwillimbury
Whitby
Concrete Foundation - Ensuring Strength & Stability | ACCL Waterproofing
17361
post-template-default,single,single-post,postid-17361,single-format-standard,ajax_fade,page_not_loaded,,paspartu_enabled,qode_grid_1300,side_area_uncovered_from_content,qode-content-sidebar-responsive,qode-theme-ver-9.2,wpb-js-composer js-comp-ver-4.11.2.1,vc_responsive
 

Concrete Foundation – Ensuring Strength & Stability

Concrete Foundation – Ensuring Strength & Stability

concrete foundationThere are two key factors that you want in a foundation: strength and stability.  A well-designed concrete foundation provides the stability, safety, and durability that your home requires.

Prepping for a Concrete Foundation

Healthy soil is just as important as the footings and concrete foundation that lie upon it.  When building any cement foundation it is a good idea to have the soil examined for its load-bearing quality.  Consulting your local building department about the average frost depth in your area is also recommended.  Concrete slabs and footings should be built on undisturbed virgin soil or compacted soil.  The soil to be uniformly graded and well drained.

 

The Power of Concrete

Concrete is a mixture of Portland cement, gravel or crushed stone (coarse aggregate), sand (fine aggregate), and water.  Once that mixture hardens it becomes one of the strongest building materials used today.  Determining the right mix is the key to making strong, durable concrete.  Too much water weakens the mixture but too little will render it almost useless.

The wet concrete is poured into molds.  These forms, as they are called, are commonly made of lumber and plywood sheathing and shape the concrete as it hardens.  The forms must be strong enough to withstand the force of the concrete pushing against it as the mixture dries.  Concrete footings support foundation walls and should be set below the frost line to avoid frost heave damage.

Given the quick-drying nature of concrete, it is important to work quickly and handle it as close to the job site as possible.  The mixture is poured into the farthest corner of the forms.  Each new load is placed against the previous one and a shovel or hoe is used to spread the mixture evenly.  Air bubbles form easily but are kept under control by stamping or jabbing a shovel or hoe in and out of the concrete.

The Curing Process

The curing process requires the concrete to remain moist.  It is important to spray water on it from a garden hose.  It is then usually covered with large plastic sheets or waterproof paper to prevent evaporation. The application of a curing compound to the damp surface is another way to keep moisture in.

The form-work can be removed after about a day, but be sure to do it carefully in order to avoid damage to the concrete. It will take about a month for the concrete to cure, so it’s advisable not to hammer or pry against it during this period.

As for concrete repairs, small cracks can be fixed with a crack sealer, preferably a ready-mix material that can be set in place using a trowel. The sealer comes in liquid or a caulk-like form. Larger cracks may need to have weak spots chiseled out in order to widen out the bottom of the groove. Repairs can be carried out with a cement-and-sand mix.

No Comments

Post A Comment

Call Now Button